Products
Battery Backup Sump Pump System - PHCC Pro Series 1850
- 1,850 GPH at 10 ft. lift
- 12-volt DC sump pump with decades of proven reliability
- Dual float switches for added reliability
- Automatically switches to battery power when AC fails
Dependable 1850 GPH, continuous-duty, submersible pump
Request Free Quote Features
- 1,850 GPH at 10 ft. lift
- 12-volt DC sump pump with decades of proven reliability
- Dual float switches for added reliability
- Automatically switches to battery power when AC fails
- Remote monitoring capability with additional PHCC Pro Series CONNECT Modules allow you to receive real time alerts
- USB Data Port and Remote Terminals connect to external devices such as PHCC Pro Series CONNECT Modules, home automation systems or other devices for remote notification
- System pumps intermittently for days
- Recharges battery automatically
- Designed for use with maintenance or maintenance free batteries
- 3 Year Warranty
- Backup will assist primary pump if excessive amounts of water are entering the sump pit
- Accommodates up to two (2) B-2200 batteries for 100 hours of pumping (Based on 10%y cycle. Run times may vary based on inflow of water)
Battery Backup Sump Pump System - PHCC Pro Series 2400
- 2,400 GPH at 10 ft. lift
- 12-volt DC sump pump with decades of proven reliability
- (2) Caged dual float switches for added reliability
- Automatically switches to battery power when AC fails
The PHCC Pro Series 2400 is the top of the line backup sump pump system. Automatic battery backup system for ultimate security and peace of mind with a 3 year warranty. Pumps 40 gallons per minute.
Request Free Quote Features
- 2,400 GPH at 10 ft. lift
- 12-volt DC sump pump with decades of proven reliability
- (2) Caged dual float switches for added reliability
- Automatically switches to battery power when AC fails
- Remote monitoring capability with additional PHCC Pro Series CONNECT Modules allow you to receive real time alerts
- USB Data Port and Remote Terminals connect to external devices such as PHCC Pro Series CONNECT Modules, home automation systems or other devices for remote notification
- Backup will assist primary pump if excessive amounts of water are entering the sump pit
- System pumps intermittently for days
- Can run directly on AC power and battery power
- Automatically switches to battery power when AC fails
- Recharges battery automatically
- Designed for use with maintenance or maintenance free batteries
- Accommodates up to two (2) B-2200 batteries for 100 hours of pumping (Based on 10%y cycle. Run times may vary based on inflow of water.)
- 3 Year Warranty
Primary Sump Pump / Flow-Mate Model 98
- Corrosion-resistant, powder coated epoxy finish
- Durable, cast iron construction
- Cast iron switch case, motor, pump housing and base
- No sheet metal parts to rust or corrode
Effluent or dewatering submersible pumps for septic tanks, low pressure pipe (LPP) and enhanced flow STEP systems.
Request Free Quote Features
- Corrosion-resistant, powder coated epoxy finish
- Durable, cast iron construction
- Cast iron switch case, motor, pump housing and base
- No sheet metal parts to rust or corrode
- All castings are cast iron class 25-30 25000# tensile strength
- Stainless steel screws, guard, handle, arm and seal assembly
- Float-operated 2-pole mechanical switch
- Permanent split capacitor motor, oil-filled and hermetically-sealed, automatic reset thermal overload protection
- Bearings - upper & lower oil-fed cast iron
- Carbon and ceramic shaft seal
- Entire unit pressure-tested after assembly
- Watertight, neoprene square ring between motor and pump housing
- Maximum temperature for effluent or dewatering: 130°F (54°C)
- Passes 1/2" (13 mm) spherical solids
- No screens to clog
- 1 1/2" NPT discharge (1 1/2" x 2" PVC adapter included with BN & BE Models)
- On point: 9 1/2" (24 cm) / Off point: 3" (8 cm)
- Major width: 10-1/8" (25.7 cm) / Major height: 12" (30 cm)
Primary Sump Pump / Mighty-Mate 50 Series
- Cast iron switch case, motor and pump housing
- Engineered thermoplastic base
- Engineered, glass-filled, plastic impeller with metal insert
- Stainless steel guard and handle
Submersible pump for dewatering (sump) or effluent (septic tank systems).
Request Free Quote Features
- Cast iron switch case, motor and pump housing
- Engineered thermoplastic base
- Engineered, glass-filled, plastic impeller with metal insert
- Stainless steel guard and handle
- Lower and upper bearings, oil-fed cast iron